Elete Technology Co.,Ltd

Designing rugged interconnects for outdoor 5G base stations? Precision alignment is non-negotiable.

To prevent pin wear and maintain seamless signal integrity under severe vibration, ELETE’s interconnect series delivers:

Precision Guide Posts: Seamless blind-mating for tight enclosure setups.

Fully Shrouded Housing: Superior anti-vibration defense that shields contact pins against mechanical fatigue.

Trusted by leading telecom supply chains. Which specifications matter most in your current PCB/connector architecture?

ELETE High-Current Press-Fit Pins

Happy Dragon Boat Festival!

Struggling with soldering bottlenecks on your power module line? 🔌⚡

ELETE’s IGBT Press Fit Pins = solderless, gas-tight, no thermal stress. Built for EVs & inverters.

👉 DM us for custom dimensions & datasheets.

⚡ 𝐒𝐭𝐨𝐩 𝐫𝐞𝐝𝐞𝐬𝐢𝐠𝐧𝐢𝐧𝐠. 𝐒𝐭𝐚𝐫𝐭 𝐫𝐞𝐩𝐥𝐚𝐜𝐢𝐧𝐠.

Elete Technology 𝐅𝐂𝐙𝐃𝐒𝐌𝐃1 series is explicitly marketed as a 1:1 𝐜𝐨𝐦𝐦𝐞𝐫𝐜𝐢𝐚𝐥 𝐞𝐪𝐮𝐢𝐯𝐚𝐥𝐞𝐧𝐭 to the Molex 505110 series.

✅ Identical 0.5mm pitch, right-angle, bottom contact, ZIF

✅ Same LCP housing material

✅ Same 0.5A current rating

✅ Drop-in replacement – no PCB changes

👉 𝐒𝐞𝐞 𝐭𝐡𝐞 𝐬𝐩𝐞𝐜𝐬? 𝐓𝐡𝐞𝐲 𝐦𝐚𝐭𝐜𝐡 𝐩𝐞𝐫𝐟𝐞𝐜𝐭𝐥𝐲. 𝐒𝐰𝐢𝐩𝐞 𝐟𝐨𝐫 𝐭𝐡𝐞 𝐜𝐨𝐦𝐩𝐚𝐫𝐢𝐬𝐨𝐧 𝐭𝐚𝐛𝐥𝐞.

Available now from 4 to 60+ positions.

𝐅𝐫𝐞𝐞 𝐬𝐚𝐦𝐩𝐥𝐞𝐬 𝐟𝐨𝐫 𝐪𝐮𝐚𝐥𝐢𝐟𝐢𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬.

📩 𝐃𝐌 𝐨𝐫 𝐜𝐨𝐦𝐦𝐞𝐧𝐭 “𝐒𝐀𝐌𝐏𝐋𝐄” 𝐭𝐨 𝐠𝐞𝐭 𝐭𝐡𝐞 𝐜𝐫𝐨𝐬𝐬-𝐫𝐞𝐟𝐞𝐫𝐞𝐧𝐜𝐞 𝐠𝐮𝐢𝐝𝐞.

Drop-in Replacement for Molex 505110? Meet Elete Technology FCZDSMD1 Series – 1:1 Commercial Equivalent, Same LCP, Same 0.5A

Tired of long lead times or rising costs for the Molex 505110 (Easy-On FD19) connector?
Elete Technology introduces the FCZDSMD1 series – explicitly engineered as a pin-to-pin, 1:1 commercial equivalent to the Molex 505110.

🔁 Identical footprint – no PCB redesign
🧪 Same LCP material – excellent heat resistance
⚡ Same current rating – 0.5A per contact
📐 Same mechanical specs – 0.5mm pitch, right-angle SMT, bottom contact, ZIF

From automotive displays to industrial controls and consumer electronics, the FCZDSMD1 series delivers risk-free substitution with better supply security and cost efficiency.

📦 Available in a wide range of pin counts (4 to 60+). Samples and mass production ready.

👉 Contact Elete Technology today for free samples and the official cross-reference guide.
Alternative doesn't mean compromise – it means smarter choice.

Stop guessing with Press-Fit.

You know the drill:

❌ PCB cracks from insertion stress
❌ Tolerance mismatch = loose or stuck pins
❌ Bent pins = scrapped boards

ELETE Press-Fit Pin fixes all three:

✅ Compliant eye-of-needle → absorbs stress, protects BGA
✅ In-house process control (IATF 16949,

What if you could skip the oven, avoid the flux, and still get a perfect connection?

You can. It’s called press-fit. 🧊🔌

✅ Thermally stress-free
✅ Cleaner assembly line
✅ Field-proven for harsh environments

Cold connection. Hot performance. Every time.